Send DTMF

Owned by Krishna Sinha
Sept 27, 2021
2 min read

OVERVIEW:

  • The 'Send DTMF' Activity allows you to send a DTMF signal to the Voice Interaction.

  • After opening the 'Send DTMF' activity, you will get the below configuration panel.

Default Configuration Parameters:

  • Title: The title field is a short piece of info for the DTMF signal purpose. This value is not sent to the ACD and is used for logging purposes only.

  • DTMF: Enter the digits in the DTMF field which will be sent to the Voice Interaction.

 

HOW IT WORKS:

A Simple Example to configure the 'Send DTMF' activity in PopFlow Studio.

  • Select the 'Send DTMF' activity from the 'Activity Sidebar'.

  • Click on the 'Send DTMF' activity to open and configure the 'Send DTMF' activity.

  • Enter the short info for the DTMF inside the 'Title' field.

  • Enter the 'DTMF' value inside the 'DTMF' field. A simple example is shown below pic.

  • Once the configuration of 'Send DTMF' is completed you can close and save the activity by clicking outside of the activity panel.

 

This document may contain confidential and/or privileged information belonging to OpenMethods. If you are not the intended recipient (or have received this document in error) please notify the sender immediately and destroy this document. Any unauthorized copying, disclosure, or distribution of the material in this document is strictly forbidden.